Closet Rod Distance From Wall. Make this a full 80 1/4 inches above the ground, which is high enough to hang two levels of clothing with 40 inches in between. However, in custom closets, you can make them any length you want.
Minimum closet depth is 24 so that puts the closet rod at 12 too. A typical closet can include two levels of hanging rods. The closet rod should be 12 inches away from the back wall of the closet.
The Rod Must Be The Same Diameter As The Rod Holder.
If your rod’s too long, you’ll have to measure the closet width and saw the rod down. Minimum closet depth is 24 so that puts the closet rod at 12 too. However, in custom closets, you can make them any length you want.
The Only Standards Have To Do With The Actual Closet Dimensions That Are Specified In Building Codes.
Keep in mind that the average closet has a depth of 24 inches. The bracket you pick should be a bit longer so that enough of it extends past the rod and support it. Certain types of clothing tend to extend past the edge of the hanger.
If Measuring In Cm, Then It Will Be 121.92 Cm In Width By 121.92 Cm In Depth.
Start by measuring the distance far away from the surface of the wall. People typically put the closet rods in the middle of the closet. People typically put the closet rods in the middle of the closet.
A Common Convention Is 12 From The Back Wall To The Center Of The Rod.
How far apart should i install the support brackets for my wire system? The minimum ten inches is ideal but this will also depend on the size of the hanger. People typically put the closet rods in the middle of the closet.
A Common Convention Is 12 From The Back Wall To The Center Of The Rod.
Usually, a rod extends from wall to wall in a standard builder’s closet. Certain types of clothing tend to extend past the edge of the hanger. Shirts and blouses take up roughly one inch of rod space, and dresses use about two to three inches of rod space.
